*NEW PRODUCT NOW AVAILABLE*

*NEW PRODUCT NOW AVAILABLE *

Only £350 Plus VAT

Following in the tradition of the original LinkRunner, LinkRunner Pro was designed to provide desktop support and network technicians with a simple, dedicated tool for resolving the most common PC user and device connectivity issues.

Because of rapid network evolution, today?s connectivity problems are much more complex than they used to be. Higher bandwidth requirements have expedited Gigabit proliferation. Greater security threats have necessitated tighter control measures like 802.1X. And technologies like VoIP and WLAN have given rise to a greater reliance on PoE for power. LinkRunner Pro recognizes these changes, and empowers technicians to address today?s new challenges.

When no test documentation is available, closing trouble tickets can be a frustrating and time-consuming process. Finger pointing among different groups and redundant testing are just a couple of the wastes that occur. With today?s focus on operational efficiency, IT departments don?t have time for wastes like these. LinkRunner Pro can eliminate finger pointing and reduce redundant testing by generating objective, professional link status reports that can be printed or routed electronically.

Isolate connectivity and application response issues in seconds with NetProve.

Verify, isolate, and document network connectivity and application port response problems faster than ever before with automated NetProve diagnostics. You receive a call from a user blaming the network for slow application performance. Armed with a NetTool Series II, in seconds you can prove whether the network is truly at fault by seeing connectivity to key network devices and services. If the network is at fault, NetProve will isolate the source of the problem so you can fix it fast. If it is not the network, NetProve will identify which application port is slow to respond so you can dispatch the appropriate resource to correct the problem. This revolutionary new way to resolve connectivity and application response issues is at least four times faster than conventional methods, resulting in improved productivity and happy users.

NetProve improves IT staff efficiencies through improved workflow ? simply create multiple catalogs representing various segments of your network. Within minutes you can prove connectivity to up to 100 enterprise key devices and services.

• Identifies port services like Ethernet, ISDN, POTS and Token-Ring while reporting such crucial information as network speed, capability and location of switches and other network devices.
• Pinging function verifies connectivity to network devices and queries PC/NICs.
• Detects legacy Phantom Power, reports current and voltage capability of analogue telephone lines, identifies (maps) remotes while cable testing
• Conducts link tests to ID speed
• Verifies functional speed capability of terminated unconnected cable runs by sampling data packets between two LanScaper units, which exercises the run and reports the result
• Automatically accesses DHCP host and obtains network information
• Tests cabling configuration and verifies connectivity and length of run while conducting tests for opens, shorts, miswires, split pairs, and reversals
• Identifies HUBs, NIC, or auto MDI/MDI-X devices
• Blinks HUBs to ascertain connected configuration
• Displays advertised network speed/duplex
• Measures and reports any voltage on lines
• Wiremaps network connections with remote identifiers
• Generates multiple tone levels for signal tracing and cable identification

LanScaper is also available in a kit bundle including 8 office identifiers and a high sensitivity tone probe.

Connect Pinger Plus and the inbuilt DHCP client will automatically configure the tester for immediate use on your network. Immediately begin PINGing local or remote IP devices with the first tester to provide Gigabit over copper link testing.

Use the powerful PING range feature to find available IP address.

The Profile feature allows up to eight different test setups (including source and destination IP address, subnet mask and gateway address) to be pre-programmed. Having Profiles allows a user to quickly test large networks with multiple VLANs.

The Pinger Plus also identifies reversed polarity for improperly connected wire pairs and provides a Port Identification feature with selectable blink rates to identify which port on a hub or switch that a wall outlet is connected.

Pinger Plus is essential for the smooth operation todays networks.

The most advanced Link Tester available, the new LanMaster 26 features Gigabit over copper Link testing capability and VoIP/PoE detection. The Model 26 even measures the voltage supplied by the VoIP or PoE port with typical loading to ensure that the voltage level is adequate. After verifying correct power is available, the LanMaster 26 tests a VoIP or PoE port to determine the speed and duplex mode.

The Port ID feature identifies which port on a hub or switch that a wall outlet is connected by flashing the Link light on the connected port.

The LanMaster 26 provides critical network connectivity and configuration information needed to maintain and troubleshoot a LAN at an affordable price.

Testing unused outlets can identify telephone lines and hub/switch ports available for reassignment. The LANMASTER 30 is an essential tool for maintaining networks containing both Ethernet and Token Ringdevices. Standard Ethernet or Fast Ethernet Links are identified and equipment support for 10/100 Auto-negotiation is displayed.

Token Ring testing includes insertion into the ring and measuring required current levels. Telecom systems and LANs can now be supported with a single tool.

LanMaster 35 features PoE measurement with actual loads to verify required power is available before connecting a powered device such as a VoIP phone or wireless access point. The unit identifies the power configuration as End-span, Mid-span or All-span and the type of power as IEEE 802.3af, Cisco Pre-Standard or Non-Standard. A Link resistance measurement feature helps to identify cabling problems.

LanMaster 35 also tests 10/100/1000 BaseTX Links providing the speed and duplex mode for the Link. In addition, the tester includes Tone Generation for cable tracing, TDR length measurement, and Port Identification to provide a complete suite of LAN test functions.

LanMaster 35 provides essential PoE and Link testing capabilities in a low cost handheld tester. The optional CableTracker 15 Tone Tracing Probe works with the LanMaster 35 Tone Generator feature to trace cables or locate connected punchdowns.

• Tests network cable pairs for Power over Ethernet (PoE)
• Identifies the power type as IEEE 802.3af, Cisco Inline or Non-Standard
• Makes power measurements with loads simulating actual powered devices
• Displays voltage and polarity for wire pairs and power configuration as End-span, Mid-span or All-span
• Identifies damaged cables and bad punchdowns by measuring Link Resistance
• Detects 10/100/1000 BaseTX Link speed and duplex mode
• Measures cable length and open or short conditions
• Provides Port ID function (link light activation) for identifying connected ports
• Applies a tone signal for tracing cables with the CT15 CableTracker Tone Probe